4 multi-input stereo channels: RIAA preamps for turntables on 4 inputs
3-band total kill EQ: +6dB to off
2 FX sends: pre/post selection (internal on FX2)
2 stereo returns
Headphone monitor with mix/cue control: 3.5mm and ¼” sockets
2 analogue VCF filters: low-pass, band-pass, high-pass, resonance frequency, and filter ‘on’ switch
Assignable LFO with depth control
Mic input: On XLR connector; gain control and 2-band EQ control available
Power supply: High performance internal switch-mode supply
RIAA: for THREE turntables (four via internal jumper link)
Dual Rail VCA Cross Fader
USB SoundCard:
Uses 24 bit stereo Analogue to Digital converters and Digital to Analogue converters (not lower spec CODECs
Sample rate can be set to either 44.1kHz or 48kHz; interfaces to any digital audio source up to 192kHz
Soundcard fed from main mix, FX1, or direct from channels
8 channels - either 6 channels from a PC and 2 returns or 4 channels from a PC and 4 returns.
Sends - mix, FX, or individual analogue channels may be routed to PC or digital outputs
MIDI Controller:
Mappable MIDI controls:
105 MIDI control messages available
8 x 60mm linear faders
16 x detented rotary pots
10 rotary encoders, 50 switches, 2 custom jog wheels with micro switches
8 illuminated push switches
Multi-function jog wheels with switched navigation control
Xone:3D is compatible with any PC software that has MIDI assignable functions: for instance,
lighting controller or visual effects programs |
| |
| e-mail: |
 |
|
| |
|
|
|
